Facon 12V DC PIR Motion Sensor Switch, Use with Strip Lights, LED Lights, Incandescent and Halogen Bulbs(White)

• 【Application & Compatibility】 Designed for 12volt DC Power Applications. Compatible to use with LED Lights, Incandescent, Halogen bulbs, and LED Strip Lights with 12V DC Power Supply.

• 【Power & Sensor Function】 Rated up to 25 Watts for single or multi-lights. DO NOT over-load the max wattage. Add this switch to give your lamps motion sensor functionality.

• 【Detection & Delay】 Motion sensor can be activated when a human is within 16-20ft. The light will stay on for 30-50 secs when detected by the motion sensor.

• 【Easy Installation】 Installed in the standard 4-wires configuration. Lock the PIR sensor switch anywhere you want with 2 screws.

• 【Electrical Connections】
First, connect the sensor switch to a 12V power supply:

1. Connect the black wire(s) with the “IN-” mark to the negative wire of the supply circuit.

2. Connect the red wire(s) with the “IN+” mark to the positive wire of the supply circuit.

Then, connect the switch to your lights:

1. Connect the black wire(s) with the “OUT-” mark to the negative wire(s) of the LED lamps.

2. Connect the red wire(s) with the “OUT+” mark to the positive wire(s) of the LED lamps.